Product Catalog
Polycarboxylate superplasticizers (PCE), naphthalene, accelerators, expansive agents and grouting admixtures. Every category is available as traded stock or direct-from-plant — open any product for specifications, governing standards and the recommended manufacturer.
Polycarboxylate Superplasticizer (Standard)
A third-generation polycarboxylate high-performance superplasticizer synthesised from HPEG / EPEG macromonomers. Water reduction above 35% at low dosage, measurably improving both fresh workability and hardened performance.
High Slump-Retention Polycarboxylate Superplasticizer
Engineered for long haul distances and hot-weather placement. A slow-release mechanism keeps slump loss over time to a minimum, so the mix is still workable when it reaches the pump.
Early-Strength Polycarboxylate Superplasticizer
Accelerates early strength development while holding high water reduction, shortening steam-curing cycles in precast and on-site demoulding time, and lifting throughput.
Viscosity-Reducing / Cement-Saving PCE
Designed for C50-and-above high-strength and self-compacting concrete. At equal flow it cuts viscosity sharply, improves pumping and filling — and lets you reduce binder content.
FDN Naphthalene Superplasticizer
A sulfonated naphthalene formaldehyde condensate. Strong value for money and good compatibility with a wide range of cements and fly ash — the mature, general-purpose water reducer.
Retarding Superplasticizer
Water reduction plus a retarding component that delays initial set — built for thermal control in mass concrete and for joint treatment in layered pours.
Concrete Air-Entraining Agent
Introduces a uniform, stable system of microscopic air bubbles. Markedly improves resistance to freeze-thaw cycling and de-icing salt scaling, while improving pumping and workability.
Alkali-Free Liquid Accelerator
For shotcrete. Fast initial and final set, with an alkali-free formulation that dramatically reduces harm to both the crew and the concrete's later-age strength.
High-Performance Concrete Expansive Agent (HCSA / UEA)
Generates controlled expansion under restraint to compensate for concrete shrinkage, improving crack resistance and impermeability in below-grade and post-poured strip structures.
Admixture for High-Strength Non-Shrink Grout
Formulated for cementitious grouts: delivers high flow, slight expansion and early strength so equipment foundations and prestressing ducts end up dense and properly anchored.